StartGroepenDiscussieMeerTijdgeest
Doorzoek de site
Onze site gebruikt cookies om diensten te leveren, prestaties te verbeteren, voor analyse en (indien je niet ingelogd bent) voor advertenties. Door LibraryThing te gebruiken erken je dat je onze Servicevoorwaarden en Privacybeleid gelezen en begrepen hebt. Je gebruik van de site en diensten is onderhevig aan dit beleid en deze voorwaarden.

Resultaten uit Google Boeken

Klik op een omslag om naar Google Boeken te gaan.

Bezig met laden...

Design Loads on Structures during Construction (Standard ASCE/SEI 37 -14)

door American Society of Civil Engineers

LedenBesprekingenPopulariteitGemiddelde beoordelingDiscussies
6Geen2,615,901GeenGeen
Prepared by the Design Loads on Structures during Construction Standards Committee of the Codes and Standards Activities Division of the Structural Engineering Institute of ASCE. Design loads during construction must account for the often short duration of loading and for the variability of temporary loads. Many elements of the completed structure that provide strength, stiffness, stability, or continuity may not be present during construction. Design Loads on Structures during Construction, ASCE/SEI 37-14, describes the minimum design requirements for construction loads, load combinations, and load factors affecting buildings and other structures that are under construction. It addresses partially completed structures as well as temporary support and access structures used during construction. The loads specified are suitable for use either with strength design criteria, such as ultimate strength design (USD) and load and resistance factor design (LRFD), or with allowable stress design (ASD) criteria. The loads are applicable to all conventional construction methods. Topics include: load factors and load combinations; dead and live loads; construction loads; lateral earth pressure; and environmental loads. Of particular note, the environmental load provisions have been aligned with those of /I Minimum Design Loads for Buildings and Other Structures, ASCE/SEI 7-10/N. Because ASCE/SEI 7-10 does not address loads during construction, the environmental loads in this standard were adjusted for the duration of the construction period. This new edition of Standard 37 prescribes loads based on probabilistic analysis, observation of construction practices, and expert opinions. Embracing comments, recommendations, and experiences that have evolved since the original 2002 edition, this standard serves structural engineers, construction engineers, design professionals, code officials, and building owners.… (meer)
Onlangs toegevoegd doorShleeves90, academiccenter
Geen
Bezig met laden...

Meld je aan bij LibraryThing om erachter te komen of je dit boek goed zult vinden.

Op dit moment geen Discussie gesprekken over dit boek.

Geen besprekingen
geen besprekingen | voeg een bespreking toe
Je moet ingelogd zijn om Algemene Kennis te mogen bewerken.
Voor meer hulp zie de helppagina Algemene Kennis .
Gangbare titel
Oorspronkelijke titel
Alternatieve titels
Oorspronkelijk jaar van uitgave
Mensen/Personages
Belangrijke plaatsen
Belangrijke gebeurtenissen
Verwante films
Motto
Opdracht
Eerste woorden
Citaten
Laatste woorden
Ontwarringsbericht
Uitgevers redacteuren
Auteur van flaptekst/aanprijzing
Oorspronkelijke taal
Gangbare DDC/MDS
Canonieke LCC

Verwijzingen naar dit werk in externe bronnen.

Wikipedia in het Engels

Geen

Prepared by the Design Loads on Structures during Construction Standards Committee of the Codes and Standards Activities Division of the Structural Engineering Institute of ASCE. Design loads during construction must account for the often short duration of loading and for the variability of temporary loads. Many elements of the completed structure that provide strength, stiffness, stability, or continuity may not be present during construction. Design Loads on Structures during Construction, ASCE/SEI 37-14, describes the minimum design requirements for construction loads, load combinations, and load factors affecting buildings and other structures that are under construction. It addresses partially completed structures as well as temporary support and access structures used during construction. The loads specified are suitable for use either with strength design criteria, such as ultimate strength design (USD) and load and resistance factor design (LRFD), or with allowable stress design (ASD) criteria. The loads are applicable to all conventional construction methods. Topics include: load factors and load combinations; dead and live loads; construction loads; lateral earth pressure; and environmental loads. Of particular note, the environmental load provisions have been aligned with those of /I Minimum Design Loads for Buildings and Other Structures, ASCE/SEI 7-10/N. Because ASCE/SEI 7-10 does not address loads during construction, the environmental loads in this standard were adjusted for the duration of the construction period. This new edition of Standard 37 prescribes loads based on probabilistic analysis, observation of construction practices, and expert opinions. Embracing comments, recommendations, and experiences that have evolved since the original 2002 edition, this standard serves structural engineers, construction engineers, design professionals, code officials, and building owners.

Geen bibliotheekbeschrijvingen gevonden.

Boekbeschrijving
Haiku samenvatting

Actuele discussies

Geen

Populaire omslagen

Snelkoppelingen

Waardering

Gemiddelde: Geen beoordelingen.

Ben jij dit?

Word een LibraryThing Auteur.

 

Over | Contact | LibraryThing.com | Privacy/Voorwaarden | Help/Veelgestelde vragen | Blog | Winkel | APIs | TinyCat | Nagelaten Bibliotheken | Vroege Recensenten | Algemene kennis | 203,233,786 boeken! | Bovenbalk: Altijd zichtbaar